cricri, email to grosmomo500@gmail.com rejected. Try here to send a copy: Thank you so much, cricri, I am very keen on arriving to use gros.xml again. I am also in Android 12. When you reported you´ve corrected gros.xml I ´d a look into folder routing under Osmand.net. This folder was empty. Nothing in there.
Yet this was hard to understand, because when starting with your routing files, I proceeded as described in your doc. And the files were there in folder routing. And now, because nothing was in routing folder I copied, petit, gros and enduro.xml into the folder routing. But now I could not imagine where the connection would made between the profile which at the beginning was listed named gros in the profile list and the file gros.kml in the folder. Especially considering the circumstance that the folder was empty. Meanwhile I will delete all the new created profile. Cricri, whatever are your ideas, let me know, I´ll try. N hesite pas de repondre en francais. Du fait que je ne pratique plus le Francais depuis presque 40 an. Je manque beaucoup d expressions. Mais la lecture ira. Horst
to cricri, once again I can´t respond to your mail from grosmono500@gmail.com. My written message after ths reject text.
I got this message:
"I'm sorry to have to inform you that your message could not be delivered to one or more recipients. It's attached below.
The A1.net mail system
: host gmail-smtp-in.l.google.com[142.250.102.27] said: 550-5.7.26 This message fails to pass SPF checks for an SPF record with a hard 550-5.7.26 fail policy (-all). To best protect our users from spam and 550-5.7.26 phishing, the message has been blocked. Please visit 550-5.7.26 https://support.google.com/mail/answer/81126#authentication for more 550 5.7.26 information. y18-20020a056402359200b00435d3f815d5si34474720edc.456 - gsmtp (in reply to end of DATA command)"
Here my message:
cricri, I am happy hearing from you, because, I think you are the only one capable to help me. It´s only yesterday evening I returned back home from a tour (ebike(BAE?) starting at the frontier Bavaria/Austria going to AtterSee (UpperAustria), 70km/day, very muddy, so I´ve some cleaning to do. Will come back ASAP. Till later Horst
Cricri, did as you proposed. Rendering and routing files in the folders as shown. First test finished successful. Some other test in the afternoon. Till later Horst
cricri, tu vas dire, quel casse pied ce Horst. But, cricri, regarding the rendering folder, all rendering possibilities listed are also saved in that folder. The folder routing shows only the three files IO´ve imported. (enduro, petit, gros). In the profile list menu, these three are listed and all the others, but which are not in the folder. So I doutbt that your files are really connected to the profile even when having the same name. By curiosity I did the following: In the settings menue, section Selected profile, at the bottom I have the item + New profile klicking on it appears the menu Select profile to start with, I select walking The menu for New profile comes up I change the profile name to new and click SAVE the menu New.... Configure profile and again at the button of this screen under Actions is listed Copy from another profile which gives no sense.
when I not select the before mentioned New profile but the next line Import profile and klick on it, the list of the last used files is listed and among these ones also petit_trail.xml klicking on it A message appears Select a supported OSF file instead. Cricri, anny hint what is going wron. By, till later hopefully Horst
Bonjour Cricri, J'essaye à mon tour d'élaborer une carte Garmin à partir de tes données et de la suite d'outils en ligne de commande sous windows osmconvert-splitter-mkgmap. A titre pédagogique, pourrais-tu publier ou me communiquer tes lignes de commande (avec les arguments, et les fichiers de style mkgmap) tant pour générer les courbes de niveau que les cartes. J'ai vu que tu avais pu aider sur le forum Randonner Léger olivierbouillaud.com. Le rendu de osmtopo me convient tout à fait pour le vtt et la rando pédestre, mais j'ai du mal avec la partie RegExp du style mkgmap. J'apprécierais ton aide car faire sa carte pour une région limitée en profitant des dernières mise à jour d'OSM me plairait bien. Je viens de faire le Languedoc-Roussillon sans les courbes de niveaux mais il y a un problème entre le style mkgmap et ton dernier TYP du Fr-sudOsmTopo du 05/02/2024. Merci par avance. Michel
cricri, email to grosmomo500@gmail.com rejected.
RépondreSupprimerTry here to send a copy:
Thank you so much, cricri,
I am very keen on arriving to use gros.xml again.
I am also in Android 12.
When you reported you´ve corrected gros.xml I ´d a look into folder routing under Osmand.net. This folder was empty. Nothing in there.
Yet this was hard to understand, because when starting with your routing files, I proceeded as described in your doc. And the files were there in folder routing.
And now, because nothing was in routing folder I copied, petit, gros and enduro.xml into the folder routing.
But now I could not imagine where the connection would made between the profile which at the beginning was listed named gros in the profile list and the file gros.kml in the folder. Especially considering the circumstance that the folder was empty.
Meanwhile I will delete all the new created profile.
Cricri,
whatever are your ideas, let me know, I´ll try.
N hesite pas de repondre en francais.
Du fait que je ne pratique plus le Francais depuis presque 40 an.
Je manque beaucoup d expressions. Mais la lecture ira.
Horst
to cricri,
RépondreSupprimeronce again I can´t respond to your mail from grosmono500@gmail.com.
My written message after ths reject text.
I got this message:
"I'm sorry to have to inform you that your message could not
be delivered to one or more recipients. It's attached below.
The A1.net mail system
: host gmail-smtp-in.l.google.com[142.250.102.27] said:
550-5.7.26 This message fails to pass SPF checks for an SPF record with a
hard 550-5.7.26 fail policy (-all). To best protect our users from spam and
550-5.7.26 phishing, the message has been blocked. Please visit 550-5.7.26
https://support.google.com/mail/answer/81126#authentication for more 550
5.7.26 information. y18-20020a056402359200b00435d3f815d5si34474720edc.456 -
gsmtp (in reply to end of DATA command)"
Here my message:
cricri,
I am happy hearing from you,
because, I think you are the only one capable to help me.
It´s only yesterday evening I returned back home from a tour (ebike(BAE?) starting at the frontier Bavaria/Austria going to AtterSee (UpperAustria), 70km/day, very muddy, so I´ve some cleaning to do. Will come back ASAP.
Till later
Horst
Cricri,
RépondreSupprimerdid as you proposed. Rendering and routing files in the folders as shown.
First test finished successful. Some other test in the afternoon.
Till later
Horst
cricri, tu vas dire, quel casse pied ce Horst.
RépondreSupprimerBut, cricri,
regarding the rendering folder, all rendering possibilities listed are also
saved in that folder. The folder routing shows only the three files IO´ve imported. (enduro, petit, gros).
In the profile list menu, these three are listed and all the others, but which are not in the folder.
So I doutbt that your files are really connected to the profile even when having the same name.
By curiosity I did the following:
In the settings menue, section Selected profile, at the bottom I have the item
+ New profile
klicking on it appears the menu
Select profile to start with,
I select walking
The menu for New profile comes up
I change the profile name to new
and click SAVE
the menu
New.... Configure profile
and again at the button of this screen
under Actions is listed
Copy from another profile
which gives no sense.
when I not select the before mentioned New profile but the next line
Import profile
and klick on it, the list of the last used files is listed and among these ones also
petit_trail.xml
klicking on it
A message appears
Select a supported OSF file instead.
Cricri, anny hint what is going wron.
By, till later hopefully
Horst
CRICRI,
RépondreSupprimerThanks for your last mail.
I downloaded the file under link gros trail
The file title of the downloaded file was
gros trail.osf.
Opening this folder the listed content was:
rendering
....enduro.render.xml
routing
....enduro.xml
....gros_trail.xml
....moto_route.xml
....petit_trail.xml
general_settings.json
items.json
profile_pedestrian_1656927058407.json
quic_actions.json
Cricri, is that the content you wished to publish as corrected download?
Horst
Bonjour Cricri,
RépondreSupprimerJ'essaye à mon tour d'élaborer une carte Garmin à partir de tes données et de la suite d'outils en ligne de commande sous windows osmconvert-splitter-mkgmap.
A titre pédagogique, pourrais-tu publier ou me communiquer tes lignes de commande (avec les arguments, et les fichiers de style mkgmap) tant pour générer les courbes de niveau que les cartes.
J'ai vu que tu avais pu aider sur le forum Randonner Léger olivierbouillaud.com. Le rendu de osmtopo me convient tout à fait pour le vtt et la rando pédestre, mais j'ai du mal avec la partie RegExp du style mkgmap.
J'apprécierais ton aide car faire sa carte pour une région limitée en profitant des dernières mise à jour d'OSM me plairait bien.
Je viens de faire le Languedoc-Roussillon sans les courbes de niveaux mais il y a un problème entre le style mkgmap et ton dernier TYP du Fr-sudOsmTopo du 05/02/2024.
Merci par avance. Michel